Filter
Top Products
81
Configuration Reference
Packet Driver Settings (for driver
M32APD.COM)
Packet driver parameters must be stated on the M32APD.COM command
line when running the packet driver.
Packet Driver Configuration Notes
The Intel packet driver M32APD.COM conforms to FTP Software’s public
domain packet-driver specification. It is a DOS-based terminate-and-stay-
resident (TSR) program. The driver file M32APD.COM is located in the
\PKTDRV directory on the Network Drivers Disk.
Refer to your network documentation for instructions on how to install the
packet driver with your network. Most installations should be able to use
the default settings listed below.
Keywords are not case sensitive, and can be abbreviated to a unique
sequence of initial characters (for example, IN for INTERRUPT).
Packet Driver Keywords
Keyword Default Valid Values
MEMORY AUTO C000 - EF00
IOADDRESS AUTO 100 - FF80
IRQ AUTO 3 - 15
SOCKET AUTO 1 - 4
MODE MEM IO OR MEM
NOCHECK NOT PRESENT
NOLED NOT PRESENT
TXBUFFERSIZE 2 1 - 10
RXBUFFERSIZE 15 1 - 30
ERT HIGH LOW, MEDIUM, OR HIGH
NOEARLYRX NOT PRESENT
NOEARLYTX NOT PRESENT
LINESPEED AUTO 10 OR 100
LINEMODE HALF HALF OR FULL