Filter
Top Products
53
Software Installation
6 Copy the file M32ANDIS.EXE from C:\INTEL\M32A directory to
the PATHWAY directory on your hard disk or boot disk.
7 Continue with the “custom” instructions in the PathWay Access for
DOS manual.
8 Reboot the PC.
Wollongong PathWay ODI Installation
1 Run the Intel Installation Program from the Installation Disk.
2 Choose Wollongong PathWay Access from the Select Network
Operating System screen.
3 Follow the prompts to complete the Intel segment of the installation.
4 Install PathWay Access for DOS Kernel and Drivers programs
according to the instructions in the PathWay Access for DOS manual.
Before rebooting the PC, perform the following steps.
5 Run the MS-DOS batch file DCOMPVLM.BAT from the Network
Drivers Disk, as follows:
DCOMPVLM PATHWAY
DCOMPVLM.BAT will decompress and copy all required files from
the Intel Network Drivers Disk to the PATHWAY directory on your
hard disk or boot disk. (The files are LSL.COM, M32AODI.COM,
IPXODI.COM, VLM.EXE, and NET.CFG.)
6 Change to the PATHWAY directory and load the software in the
following order:
LSL
M32AODI
IPXODI (ONLY IF USING NOVELL NETWARE)
VLM (ONLY IF USING NOVELL NETWARE)
7 Load the Wollongong file ODI.EXE.
8 Continue with the instructions in the PathWay Access for DOS
manual.
9 Reboot the PC.