Filter
Top Products
44
CHAPTER2
Windows for Workgroups Version 3.11 and NetWare
(Using the ODI driver)
1 To configure Windows for Workgroups with NetWare, run the Intel
Installation Program and choose Windows for Workgroups.
2 Choose YES to “Connect to Network Server.”
3 Choose “Novell NetWare” as your network server.
4 When the installation is complete, reboot the computer.
5 At the Intel menu, choose “Load EtherExpress PRO/100 Mobile
CardBus 32 for Network Access.”
6 From the DOS prompt, run the NetWare Client install. Be sure to
install support for Windows.
7 When the Novell Client install program asks for an ODI driver, insert
the Intel Network Drivers Disk.
8 Complete the installation process and reboot the computer.
9 Log in to NetWare.
10 Start Windows for Workgroups and, in the Network program group,
double-click on the Network Setup icon.
Windows for Workgroups Network Setup will detect the NetWare
configuration and automatically select Novell NetWare as an
additional network. It will also prompt for Novell support files (from
Novell Client diskettes) if required during the installation. (If
necessary, use the Novell decompression utility to decompress the
required files.)
Windows for Workgroups Setup will also attempt to determine what
NetWare driver model you are using. If for some reason Windows for
Workgroups was unable to detect the driver model, you should select
IPXODI and LSL as the driver type.
Note that you can install NetWare as an additional network under
Windows for Workgroups, as follows:
11 In the Network Setup dialog box, choose Networks.
12 To install both Windows for Workgroups and NetWare, choose
Install Windows Network.
13 Choose Other under Additional Network Support, then select the
NetWare configuration appropriate for your network.
14 If you want to share your files or printers with others, select
“Sharing.”