Filter
Top Products
46
CHAPTER2
6 If you have not installed network support, choose Networks in the
Network Setup dialog box, select Install Windows Network, and click
OK. Otherwise proceed to Step 7. Click the Sharing button to share
files and printers.
7 In the Network Setup dialog box, choose Drivers.
8 In the Network Drivers dialog box, choose Add Adapter.
9 In the Add Network Adapter box, choose Unlisted or Updated
Network Adapter and click OK.
10 When prompted for an “unlisted, updated, or vendor-provided
network driver disk,” insert the Intel Network Drivers Disk.
11 Select “Intel M32A NDIS 2.01 Real Mode” and click OK.
12 Close the Network Drivers dialog box and click OK in the Network
Setup box.
13 Complete the installation process, inserting the Intel Network Drivers
Disk if required.
How to Remove an Existing Windows for
Workgroups Installation
1 Start Windows and select Network Setup in the Network program
group.
2 In the Network Setup dialog box, choose Drivers.
3 In the Network Drivers dialog box, choose Remove to discard any
existing network adapter drivers.
4 Choose Close and return to the Network Setup dialog box.
5 Exit the Network Setup program and exit Windows.
6 At the DOS prompt, change to the Windows system directory, as
follows
CD \WINDOWS\SYSTEM
7 Make a directory called OEM, as follows
MKDIR OEM
8 Type
DIR OEM?.INF
to see a list of driver configuration files.
9 Use the DOS EDIT program to view each OEM file to determine
which ones reference Intel.
10 Copy the old Intel configuration files to the OEM directory.