Filter
Top Products
13
Software Installation
8 Click OK.
The System Properties window reopens.
9 Click Close.
10 Click Start.
11 Select Shut Down.
12 Select Restart the Computer and click Yes.
Your computer is now set to use other PC Card devices.
Installing Toshiba Computers with Windows 95
Version 4.00.950 or 4.00.950A
If you are installing the PRO/100 CardBus adapter on Toshiba portables
with CardBus support, including the Tecra 700 series, Tecra 500 series
and Protégé 650, please follow use the following installation procedures:
1 Determine which version of Windows 95 you have, using the
guidelines under the heading “Determining Your Version of Windows
95” earlier in this chapter.
2 If your version of Windows 95 is version 4.00.950 or 4.00.950a,
complete the following steps. If your version of Windows 95 is
version 4.00.950b (OSR2) or later, follow the instructions later in this
chapter for those versions.
3 Before installing the PRO/100 CardBus adapter, it is necessary to
modify PC Card support on the computer via Toshiba’s BIOS setup
program.
4 Press Start, and select Shutdown. Select Restart in MS-DOS mode to
reboot your machine.
5 At the DOS prompt, run the Toshiba setup program by typing
TSETUP and press Enter.
6 On the setup program menu, look for an item titled “PC Card
Controller Mode”. If the mode is set to PCIC Compatible, proceed to
step 7. If the mode is set to CardBus/16-bit, press the End button on
your keyboard and then Y for Yes. Proceed to step 11.
7 Use the down arrow key to navigate through the Toshiba setup menu
to the “PC Card Controller Mode” field.