10
CHAPTER2
11 Under “Manufacturers,” click “Intel.”
12 Select the “Intel EtherExpress PRO/100 Mobile CardBus 32 manual
load." Note that this is the second driver listed. You may need to
scroll the text to see the entire driver name.
13 Click OK.
14 The Network window reopens.
15 Click OK.
The Intel dialog box appears displaying various settings. An asterisk
in any field indicates that the current setting is incorrect. Use the Up
or Down arrow to adjust the setting until the asterisk disappears.
16 Click OK.
The Copying Files window opens.
17 Insert your original Windows 95 CD or disk (identify the drive that
holds the CD or disk) and click OK.
The System Settings window opens.
NOTE:
If Windows 95 was pre-installed on your computer, the necessary files are lo-
cated in the following directory:
C:\WINDOWS\OPTIONS\CABS
18 Click No when prompted to restart the computer. (But click Yes for
Toshiba computers with CardBus support, as described in step 12
under the heading “Installing Toshiba Computers with Windows 95
version 4.00.950 or 4.00.950A” later in this section.)
DO NOT RESTART the computer at this time (unless you are using
a Toshiba CardBus computer). First, complete the following steps to
disable PC Card support:
NOTE:
Some portable computers require that PCMCIA support be disabled through the
computer's BIOS in addition to the steps below. Before completing the following
steps, please review the README.TXT file on the Network Drivers Disk for com-
puter-specific information.