Filter
Top Products
39
Software Installation
IBM Local Area Network Support Program
(version 1.2)
NDIS 2.0 Driver
1 Run the Intel Installation Program from the Installation Disk.
2 Choose IBM LAN Support Program from the Select Network
Operating System screen.
3 Follow the prompts to complete the Intel segment of the installation.
4 Install the IBM Local Area Network Support Program according to
the instructions in the IBM Local Area Network Support Program
User’s Guide. The following instructions refer to the prompts and
messages displayed with the Configuration Aid automated install
software provided with the LAN Support Program.
5 If a message appears during the LAN Support Program installation
indicating there are no IBM LAN adapters installed in the
workstation, bypass the message by pressing Enter.
6 Answer [N]o to program support for the PC Network Adapter.
7 Answer [Y]es to use of programs needing the NETBIOS interface.
8 When prompted, select the Etherand Network family of network
cards.
9 Continue with the installation until finished.
10 Use a text editor to replace the line in your CONFIG.SYS file that
reads:
DEVICE=\XX.DOS
with the line
DEVICE=\M32ANDIS.EXE
11 Still in the CONFIG.SYS file, add the parameter O=N (where O is a
letter, not zero) to the line
DEVICE=\DXMT0MOD.SYS
as follows
DEVICE=\DXMT0MOD.SYS O=N
12 Copy M32ANDIS.EXE from the directory C:\INTEL\M32A to the
root directory of your hard disk or boot disk.