Filter
Top Products
27
Software Installation
5 Write down the IRQ number to use when you proceed with the
installation.
For example, if the IRQ=6, write down the number 6.
Now continue with the Banyan Vines installation as follows:
1 Run the Intel Installation Program from the Installation Disk.
2 Choose Banyan VINES from the Select Network Operating System
screen.
3 Follow the prompts to complete the Intel segment of the installation.
The Installation Program also creates a \VINES directory on your hard
disk.
4 Copy the files from the VINES Master disk into the VINES directory.
5 Copy the NDIS driver file and the PROTOCOL.INI file from \NDIS
directory on the Network Drivers Disk into the VINES directory.
6 Change to the VINES directory.
7 Type PCCONFIG and select Network Card Settings, followed by
NDIS Ethernet.
8 Enter the IRQ value you wrote down in Step 5 of the M32ATEST
procedure above.
9 At the PROTOCOL.INI bindings prompt, type INTELNET.
10 Press F10 to save and Esc to return to the main menu.
11 Select Login Environment Settings, followed by Default
Communications Driver, followed by NDIS Ethernet.
12 Press Esc to return to the Main Menu and press F10 to save.
13 Manually add these lines to your AUTOEXEC.BAT file:
CD\VINES
BAN
14 Manually add these lines to your CONFIG.SYS file:
DEVICE=C:\VINES\PROTMAN.DOS /I:C\VINES
DEVICE=C:\VINES\M32ANDIS.EXE