112
CHAPTER 4
Microsoft Windows for Workgroups
This section describes general troubleshooting procedures and possible
error codes you might encounter under Windows for Workgroups. Before
doing anything else, check your configuration files against the sample files
in Chapter 3, Configuration Reference of this document.
Drivers load but you cannot see anybody on the network.
• Check that you have selected the correct workgroup.
• Ensure that there are no spaces in your computer name.
When trying to perform the add adapter function, an error
occurs stating the OEMSETUP file does not contain adapter
information.
Move or rename the oem*.inf files from the windows system directory
(C:\WINDOWS\SYSTEM) and invoke the network setup program again.
Drivers do not load or errors are reported when NET START is
executed.
Ensure you are excluding the memory range used by the Intel adapter from
the memory manager in CONFIG.SYS.
Drivers do not load or errors are reported when NET START is
executed for Windows For Workgroups.
Ensure you are excluding the memory range used by the Intel adapter from
the memory manager in CONFIG.SYS.
If you are using NDIS2, edit the SYSTEM.INI file and look at NETCARD=
line.
An error occurs when NET START executes for Windows For
Workgroups.
Download the latest drivers from our website or BBS.