Filter
Top Products
103
Troubleshooting
5 CC000 11 320
6 D2000 15 320
7 CC000 15 320
8 D2000 5 340
9 CC000 5 340
10 D2000 10 340
11 CC000 10 340
12 D2000 11 340
13 CC000 11 340
14 D2000 15 340
15 D2000 15 340
The driver loaded successfully, but I can’t get on the network
A Check all connections and verify that the cable drop is good (try a
cable that is known to work on another workstation).
B Reboot by powering down the machine (cold boot). On some
machines the PC Card controller chipset is not properly reset on a
warm boot, and this can cause network errors.
C In a NetWare environment, verify that the frame type running on
your network server is the same as the FRAME type listed first in
the NET.CFG. If you are not sure what the correct Ethernet frame
type is, check with your system administrator. On a multi-server
network, add a preferred server statement to the NET.CFG.
D There could be an interrupt conflict. Try loading the driver with a
different interrupt specified in the PRO/100 CardBus adapter
configuration file. (This may also require some re-configuration
of Card and Socket Services, if they’re being used.)