Intel PRO Network Card User Manual


 
49
Software Installation
Novell NetWare 32-bit ODI Drivers
Installing the Client 32 Driver under Windows 3.x and
DOS
In order to install the Client 32 driver under Windows 3.x or DOS, the
following software is needed:
· PRO/100 CardBus adapter Network Drivers Disk
· NetWare Client 32 for DOS/Win 3.1x disks from Novell
Installing under DOS
1 Put the NetWare Client 32 install disk in drive A.
2 Type a:\install and press enter.
3 Select the products you want to install.
4 Follow the onscreen instructions
5 At the Select a LAN Driver screen, select User Specified LAN
Driver
6 Insert the Intel Network Drivers Disk in drive A
7 Type A: and press enter.
8 Select Intel EtherExpress PRO/100 CardBus Adapter
DEVICE=C:\LANMAN\NFS-NDIS.SYS
as follows:
DEVICE=C:\LANMAN\PROTMAN.SYS
DEVICE=C:\LANMAN\M32ANDIS.EXE
DEVICE=C:\LANMAN\NFS-NDIS.SYS
9 Verify that your AUTOEXEC.BAT file contains a line that reads
C:\LANMAN\NETBIND
before the line that reads
NET INIT
10 Configure PC-NFS options according to your PC-NFS documentation,
and reboot the computer.