Filter
Top Products
14
CHAPTER2
8 Press the space bar until the PC Card Controller Mode is set to
CardBus/16-bit.
9 Press the End button on your keyboard and press Y when prompted.
10 Reboot your computer.
11 Perform steps 1 through 17 under the heading “Installing with
Windows 95 version 4.00.950 or 950a” at the beginning of the
Installing with Windows 95 section earlier in this chapter.
12 After completing steps 1 through 17, select Yes when prompted to
reboot the machine. At this point installation is complete.
Re-enabling PC Card support on Toshiba Computers
If you have disabled PC Card support in order to use the PRO/100
CardBus adapter under Windows 95 version 4.00.950 or 950a, and now
want to use a PC Card, such as a PC Card modem in your computer, you
will need to re-enable PC Card support by following these steps:
1 Click Start.
2 Choose Settings.
3 Choose Control Panel.
The Control Panel window opens.
4 Double-click the Network icon.
The Network window opens.
5 Click the Configuration tab.
6 Select the “Intel EtherExpress PRO/100 Mobile CardBus 32 Manual
Load.”
7 Click Remove.
8 Click OK.
9 Click No when prompted to restart the computer.
10 Press Start, and select Shutdown. Select Restart in MS-DOS mode to
reboot your machine.
11 At the DOS prompt, run the Toshiba setup program by typing
TSETUP.
12 Use the down arrow key to navigate through the Toshiba setup menu
to the “PC Card Controller Mode” field.
13 Press the space bar until the PC Card Controller Mode equals PCIC
Compatible.