Intel PRO Network Card User Manual


 
63
Configuration Reference
@ECHO ===== END LANTASTIC CONFIGURATION =====
:STARTNET_DONE
CD \
Banyan VINES
NOTE:
If you are using DOS Multi-menu CONFIG.SYS, the three VINES related lines in the
CONFIG.SYS will be located at the end of your CONFIG.SYS. You will have to
manually move those lines into the proper menuitem section of your CONFIG.SYS.
If you are getting Banyan VINES Error codes 10xx, check your
C:\VINES\NDISBAN.DOC for explanations of error codes.
Sample CONFIG.SYS
DEVICE=C:\DOS\HIMEM.SYS
REM INTEL PRO/100 CB — DO NOT CHANGE LINES BELOW (EMM)
DEVICE=C:\DOS\EMM386.EXE NOEMS X=D200-D2FF
REM DEVICE=C:\DOS\EMM386.EXE NOEMS
REM INTEL PRO/100 CB — DO NOT CHANGE LINES ABOVE
FILES=40
BUFFERS=30
REM INTEL PRO/100 CB — DO NOT CHANGE LINES BELOW (NDIS)
DEVICE=C:\VINES\PROTMAN.DOS /I:C:\VINES
DEVICE=C:\VINES\M32ANDIS.EXE
REM INTEL PRO/100 CB — DO NOT CHANGE LINES ABOVE
Sample AUTOEXEC.BAT
PATH=C:\UTIL;C:\DOS;
PROMPT $P$G
CD\VINES
BAN
Sample PROTOCOL.INI
; PROTOCOL.INI SECTION FOR THE INTEL ETHEREXPRESS
;PRO/100 32-BIT MOBILE ADAPTER.