Filter
Top Products
CHAPTER3
60
Memory Exclusion
When using a memory manager (under DOS and Windows 3.X), you must
exclude a 4K memory range between C000 and EF00 for the use of the
PRO/100 CardBus adapter. For example:
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE NOEMS X=D200-D2FF
This example excludes 4K of the D200 segment for use by the PRO/100
CardBus adapter. If the CardBus software is not configured for a specific
address, it will automatically detect a free memory range. Otherwise, be
sure the CardBus software is set to the same memory window that is
excluded.
Sample Configuration Files for Selected Network
Operating Systems
The following sample configuration files show default parameters for some
network operating systems. This information is designed to supplement the
information provided in Chapter 2, Software Installation.
Artisoft LANtastic/AI 6.0
NOTE:
If you are using DOS multi-menu CONFIG.SYS, the three LANtastic-related lines in
the CONFIG.SYS will be located in a COMMON section at the end of your
CONFIG.SYS. You will have to manually move those lines into the proper
menuitem section of your CONFIG.SYS. The same is true for the line call
c:\lantasti\startnet.bat in your AUTOEXEC.BAT file.
Sample CONFIG.SYS
device=c:\dos\himem.sys
REM INTEL PRO/100 CB — DO NOT CHANGE LINES BELOW
DEVICE=C:\DOS\EMM386.EXE NOEMS X=D200-D2FF
REM DEVICE=C:\DOS\EMM386.EXE NOEMS
REM INTEL PRO/100 CB — DO NOT CHANGE LINES ABOVE