1
Follow the instructions in this chapter to install the PRO/100 CardBus
adapter hardware and network cabling. See Chapter 2, Software
Installation for instructions on how to install network software.
The PRO/100 CardBus adapter provides access to both 10 Mbps and 100
Mbps networks with a single adapter cable, and auto-senses 10 Mbps or
100 Mbps network speed. The Adapter requires Category 5 (data
grade) unshielded twisted pair (UTP) cabling for 100 Mbps or
Category 3 or 5 for 10 Mbps.
Before Installing Hardware
Check Package Contents:
• PRO/100 CardBus adapter
• A LAN adapter cable with 15-pin PC Card connector at one end
and a RJ-45 connector at the other (for 100Base-TX or 10Base-T
Ethernet connectivity)
• Software on two 3.5-inch diskettes
• Late Breaking News card
• User’s Guide
• Product registration card
• Protective adapter case
NOTE:
Please fill out the Product Registration Card and mail it immediately.
Chapter 1
Hardware Installation