Filter
Top Products
25
Software Installation
Installing Network Software
Use the instructions under this heading in the following circumstances:
• To complete the installation of network software after you have run
the Intel Installation Program: Find your network operating system in
the alphabetical listing that follows.
• To install software for network operating systems not supported by
the Intel Installation Program (for example, on systems running MS-
DOS without Windows): Find your network operating system in the
alphabetical listing that follows, or see the headings “Generic
Installation” and “Manual Installation” in the same listing.
• To install and configure manually, without running the Intel
Installation Program: See the heading “Manual Installation” in the
alphabetical listing that follows.
Use the Modified Intel Network Drivers Disk
When prompted for a device driver or manufacturer’s disk by your
network operating system install procedure, use Intel Network Drivers
Disk.
Alphabetical Reference
The section is organized in alphabetical order by network operating
system vendor. Unless otherwise indicated, these instructions are designed
to be used with the Intel Installation Program. They assume a first-time
installation of client software on a workstation, using the configuration
values set by the Intel Installation Program or, when the Installation
Program is not used, using the default values listed in Chapter 3,
Configuration Reference.
The PRO/100 CardBus adapter supports ODI, NDIS 2.01, NDIS 3 and
packet drivers. To determine which of these drivers you need for your
networking environment, consult your network administrator or network
documentation.