Filter
Top Products
31
Software Installation
FTP Software LANWatch
Packet and NDIS 2.0 Drivers
FTP Software’s LANWatch network monitor software can be installed
using Intel’s packet or NDIS 2.0 drivers. For information on which driver
is appropriate for your network environment, refer to the FTP LANWatch
documentation.
FTP Software LANWatch Packet Driver Installation
1 Run the Intel Installation Program from the Installation Disk.
2 Choose FTP LANWatch from the Select Network Operating System
screen.
3 Follow the prompts to complete the Intel segment of the installation.
4 Install LANWatch according to the instructions in your FTP
LANWatch manual.
5 Copy the file M32APD.COM from the C:INTEL\M32A diretory to
the directory where your LANWatch files are stored.
6 (This step is not required for LANWatch versions 3.0 and later.)
Using a text editor, add the following line to your CONFIG.SYS file:
DEVICE = [
PATH
]IFCUST.SYS
where [path] is the drive and directory where your LANWatch files
are stored.
7 Reboot the PC.
8 Change to the directory of where your LANWatch files are stored and
run M32APD.COM.
9 Run LW.EXE.
26 Exit SETUP and reboot to start the network. (Some machines may
require a cold boot at this point—power the computer down and back
up again.)