Filter
Top Products
WindowsMobile 2003Chapter —2
112 700 Series Color Mobile Computer User’sManual
To Enable WPA Aut hentication Using a Preshared Key (730, 741, 751, 761 Computers)
a Set Authentication to “WPA-PSK.” See page 372 for information
about WPA encryption.
b Set Data En cryption to either “WEP” or “TKIP.” See page 372 for
information about WEP and TKIP encryption.
c Enter the new Network key.
5 Tap the 802.1x tab, select either “PEAP” or “Smart Card or Certificate”
for the EAP type,thentapProperties to adjust its settings.
6 Tap ok to return to the Configure Wireless Network screen.
7 From the Networks to access drop-down list, select “All Available,”
“Only access points,” or “Only computer-to-computer” depending on
thetypeofnetworkstowhichyouconnect.