Filter
Top Products
ProgrammingChapter —7
242 700 Series Color Mobile Computer User’sManual
FTP Serv er
FTP support is provided through the FTP Server application
FTPDCE.EXE (MS Windows CE Versions) which is provided as part the
base system.
FTPDCE is the Internet File Transfer Protocol (FTP) server process. The
server can be invoked from an application or command line. Besides ser-
vicing FTP client requests the FTP Server also send a “network announce-
ment” to notify prospective clients of server availability.
Note: You should consult the RFC959 specification for proper use of
some of these commands at the following URL:
S http://www.ietf.org/rfc/rfc959.txt for the text version, or
S http://www.w3.org/Protocols/rfc959/ for an html version
Do the following to send commands:
1 Start an FTP client and connect to the device FTP server.
2 Log in with “intermec” as the user name and “cr52401” for the pass-
word.
3 From the FTP client, send the command.
4 Wait for a response.
Synopsis
ftpdce [ options ]
Options
–Aaddr (where addr is in th e form of a.b.c.d) Sets the single target address to which to send the network an-
nounceme nt. Default is broadcast.
–Bbyte Sets the FTP data block size . Smaller sizes may be useful over slower links. Default is 65536.
–Cname Sets the device name. Used by Intermec management software.
–Fvalue Disables the default Intermec account. A value of “0” disables the account. Default is “1”.
Note that disabling the default account without providing a working access control list on the server
will resu lt in a device that will not accept any FTP connections.
–Hsec Sets the interval betwe en network annou nc ements in seconds.A value of “0” turns the netw ork an-
nouncement off. Default is 30 seconds.
–Iaddr (where addr is in the form of a.b.c.d) Sets the preferred 6920 Communications Serve r (optional).
–Llog (where log is either “0” or “1”) Sets the state of logging. Default is 0 (disabled).
–Nsec Specifies the number of seconds to wait before initially starting FTP server services.
–Pport Sets the UDP port on which the network announcement will be sent. Default port is 52401.
–Qport Sets the port on wh i ch the FTP Server will listen for connections. Defaultportis21.
–Rdir Sets the FTP mount point to th is directory. Default is the root folder of the object store.
–Tscrip S ets the script name for the 6920 Communications Server to process.
–Uurl Sets the default URL for this device.
–Z“parms” Sets extended parameters to be included in the network announcement.