Filter
Top Products
Installing Applications—Chapter 3
123700 Series Color Mobile Computer User’s Manual
7 Remove the CompactFlash card from your desktop and reinstall it into
the 700 Color Computer.
8 Warm-boot the 700 Color Computer to add these files to the Compact-
Flash storage card.
If the AUTOUSER.DAT file is found and the “RUN=” statement is cor-
rect, the task manager launches and executes your program on startup.
Copying to a Secure Digital Storage Card
1 Suspend the 700 Color Computer and remove its Secure Digital drive,
which holds a Secure Digital storage card.
2 Using a Secure Digital Adapter card, place the Secure Digital drive in
your desktop PC card drive.
3 Create a subdirectory on the PCMCIA Secure Digital drive in which to
store your application.
4 Use the CEImager application to add the autorun system to the storage
card. See the Software Tools User’s Manual to learn about CEImager.
5 Copy your application, data files, and all required DLLs and drivers to
thesubdirectorycreatedontheSecureDigitaldrive.
6 Add your application to the AUTOUSER.DAT file on the
“\SDMMC Disk\2577” directory with the following statement:
RUN=\<your directory>\<yourapp.exe>
where your directory is the directory on the Secure Digital storage card
where the application was installed, and yourapp.exe isthenameofyour
application. Finish the “RUN=” statement with a carriage return line-
feed combination. There may be multiple run statements in the file.
7 Remove the Secure Digital card from your desktop and reinstall it i nto
the 700 Color Computer.
8 Warm-boot the 700 Color Computer to add these files to the Secure
Digital storage card.
If the AUTOUSER.DAT file is found and the “RUN=” statement is cor-
rect, the task manager launches and executes your program on startup.
Replicating 700 Color Settings Using the Registry
The following information updates the registry on your 700 Color Com-
puter, confirms the registry update, then copies the information onto oth-
er 700 Color Computers in your network.
If you are using DHCP, no changes are necessary.
If you are using Static IP, the new 700 Color Computer will have the IP
address of the original 700 Color Computer because the copied registry
includes this information.
When you change the IP address u sing the Intermec Settings applet, the
information is lost when you perform a warm-boot, and the original IP
address is used.
You must load the REGFLUSH.CAB file before running the Registry Save
application. Once you do, performing a warm-boot keeps the new IP ad-
dress.