Filter
Top Products
Configurable SettingsAppendix —A
303700 Series Color Mobile Computer User’s Manual
Symbologies
You c an change bar code symbology parameter settings i n your 700 Color
Computer via the Data Collection control panel applet. The following
parameters are for bar code symbologies. Additional information about the
more common bar code symbologies are in Appendix B, “Bar Codes.” Note
that these parameters are listed in the order of their appearance within this tab.
Most of these symbologies apply to both the imager and the laser scanner
tools. However, when using an imager, the Macro PDF (page 314),Micro
PDF417 (page 316),Matrix2of5(page 318), Telepen (page 319),and
Code 11 (page 320) symbologies are not supported. Likewise, when using
a laser scanner, the QR Code (page 321), Data Matrix (page 322),and
MaxiCode (page 323) symbologies are not supported.
Note: The 730 Computer uses the EV10 APS linear imager which sup-
ports 1D symbologies.
The f ollowing table shows which bar code symbologies are supported by
an imager, a laser scanner, or the EV10 APS Linear Imager
Bar Code Symbology Imager Laser Scanner
EV10 APS
Linear Imager
Code 39 XXX
Interleaved 2 of 5 X X X
Standard 2 of 5 XXX
Matrix 2 of 5 X X
Code 128 XXX
Code 93 X X X
Codabar XXX
MSI X X
Plessey XX
UPC X X X
EAN/EAN 128 XXX
Code 11 X X
PDF417 XXX
Micro PDF417 X X
Telepen XX
Data Matrix X
QR Code X
MaxiCode X