Filter
Top Products
Configurable SettingsAppendix —A
311700 Series Color Mobile Computer User’s Manual
Code 128 FNC1 Ch aracter
The Code 128 FNC1 character (EAN 128 norms) can be any ASCII char-
acter and is used as a separator when multiple identifiers and their f ields
are concatenated. Note that this is not available when you use an imager with
your 700 Color Computer.
Non-printable ASCII characters can be entered using the following syntax
where HH is the hexadecimal value of the character.
\xHH
For example, the GS character, whose hexadecimal value is 1D, would be
entered as \x1D. In addition,the following characters have their own
identifiers:
S BEL \a
S BS \b
S FF \f
S LF \n
S CR \r
S HT \t
S VT \v
Action
Tap (+) to expand the Code 128 parameter, then type the ASCII charac-
ters to be set for the C ode 128 FNC1 character parameter.
SNMP OID
1.3.6.1.4.1.1963.15.3.3.1.1.21.1
Options
Any ASCII character (default is the GS function character — ID hex)