Filter
Top Products
136
Copy default setting PageContent of copy default setting
1 Exposure mode
140
This is the copy exposure selection mode. Auto (automatic exposure mode) or manual
(manual exposure mode) can be selected.
2 Exposure steps
3 Toner economy mode
141
141
7 or 13 exposure levels can be set for the manual exposure mode.
Select the initial toner economy mode which will be set when power is turned on. The
toner economy mode can also be turned off.
7 Output form
143
Set the initial sort mode which will be set when power is turned on.
^ Drawer for cover sheet/stitch
146
The drawer of the cover stock to be set can be selected in the stitching mode (page 91).
* This setting appears if an optional booklet stitcher is installed.
4 Auto exposure adjustment
141
If the overall exposure in the auto exposure mode is too light/dark, use this to adjust it.
5 Manual exposure adjustment
142
If the overall exposure in the manual exposure mode is too light/dark, use this to adjust it.
It can be set separately for each mode; "Text", "Photo" and "Mixed".
6 Quality
142
Initial value for the copy quality mode can be selected.
8 Paper selection
143
Select whether paper of the same size as the original is selected automatically when it is
set, or whether the size of the paper is selected manually.
9 Job Programming
143
"Regular" or "Off the platen" can be selected for the program mode setting.
"Regular": Any of the program number "1" to "7" can be selected by touching the program
key.
"Off the platen": The content of program "1" can be accessed automatically by touching
program key. Copying is possible as it is.
0 Default drawer
143
A frequently-used drawer can be selected automatically. When the Reset key is pressed
without setting an original, etc., the specified drawer in this mode can be selected.
* The stack bypass tray can not be set as a default drawer.
! Zoom mode
144
The size zoom mode (page 49) or standard zoom mode (page 48) can be selected for
enlarge/reduced copying (Zoom mode).
@ Copy limit: with # keys
144
The pre-set limit on the number of copies can be set for one copying operation is 999,
but the limit can be lowered.
# Custom border erase size
145
Set the sizes of the originals for "custom size" of border erase modes (page 64). Borders
outside the defined area will be erased.
$ F&B p. margin
145
Whether the front & back page margin is to be displayed or not for the margin copy
setting screen on page 56 can be set.
% Drawer for insert sheet
145
The drawer of the insert sheets to be set can be selected in the inter mode (page 67).
& Rotate sort
146
Set the normal sort copy or rotate sort copy by touching the sort key. The direction of
each paper can be changed in the rotate sort copy so that it makes easier to sort the
copies.
* This setting is not displayed when the copier is equipped with the optional finisher.
* Create shortcut (#1, #2)
147
The frequently-used function keys can be displayed on the basic screen. This makes
easier to select the frequently used function.
● Copy default setting