Filter
Top Products
167
Action PageMessage
Periodic maintenance is necessary to keep your copier in good condition.
Contact your service representative as soon as possible.
__
“Time for maintenance.”
Memory is full. Select if print till the last page which has just read or clear
all of the data which has already been read. Copying or reading of another
original cannot be performed until one of these is selected.
__
“Memory full.”
If paper is misfed, the copier will stop, and the location of the misfeed will
be displayed in the message display. Remove the misfed paper with the
main switch ON ( ❘ ) in accordance with the procedure.
174
“Paper misfeed.”
The finisher (optional) is not installed correctly. Install it securely.
__
“Install Finisher”
Unfinished copies were ejected into the tray of finisher (optional) due to
the problem happened during copying. Check and remove those copies.
__
“Check paper in Finisher.
Incomplete copies inside.”
Copier is inoperable due to the problem of the finisher (optional). Contact
your service representative.
__
“Finisher is out of order.
Detach Finisher.”
The number of sheets in the finisher (optional) exceeds the capacity.
Remove them.
__
“Paper capacity exceeded.
Remove paper from Finisher.”
Paper is misfed inside of the finisher (optional). See the finisher’s
instruction handbook to remove paper.
__
“Remove paper from inner tray
of Finisher.”
“Remove paper from Finisher.”
There are no staples in the indicated location of the finisher (optional).
See the finisher's instruction handbook to load staples.
__
“Out of staples. Add staples.”
Stapling and punching cannot be operated with small size paper, such as
5
1/2” x 81/2”. See the finisher’s instruction handbook.
__
“Cannot staple this size.”
“Cannot punch this size.”
The punch waste tank of finisher (optional) is full of punch waste. See the
finisher’s instruction handbook to remove the punch waste.
__
“Check punch waste tank.”
“Cannot staple.
##:maximum capacity(Staple)”
Stapling cannot be operated since the number of copies in the staple sort
mode has exceeded its maximum capacity. Press the Start key and
cancel the staple sort mode to restart copying operation.
__