Kyocera 4230 Printer User Manual


 
210
Specifications
Specifications described on page 198 are different as follows.
Type................................................Console
Original table .................................Fixed type
Copying system ............................Indirect electrostatic
Originals.........................................The platen: Sheets of paper, and books, 3-dimensional (Maximum originals size: 11” x 17”)
DF: Sheets of paper (11” x 17” - 8
1/2” x 51/2”, one-sided original: 35 g/m
2
- 160 g/m
2
, two-sided
original: 50 g/m
2
- 120 g/m
2
)
Copy sizes .....................................11” x 17”, 8
1/2” x 14”, 81/2” x 11”, 51/2” x 81/2
For 2-sided copies: 11” x 17” - 5
1/2” x 81/2
Print margin loss: 0.5-5.5 mm
Copying speed ..............................Same-size copying/memory copying; 11” x 17”: 26 copies/min., 8
1/2” x 14”: 31 copies/min.,
11” x 8
1/2”: 52 copies/min., 81/2” x 11”: 35 copies/min.
Warm-up time ................................Within 180 secs.(at room temperature of 68˚F, humidity 65%RH),
From energy saver mode: Within 30 secs. (at room temperature of 68˚F, humidity 65%RH)
First copy speed............................Within 4.5 secs. (11” x 8
1/2”, manual exposure mode)
Zoom ratio......................................Any ratio between 25 and 400% (in increments of 1%). Alternatively, or standard ratios.
Bitmap memory.............................12 MB (Standard)
Image storage memory.................32 MB (Standard)
Resolution......................................Reading: 600 x 600 dpi
Writing: 600 x 600 dpi
Paper feed system ........................Automatic feeding from drawers (2 drawers, capacity 550 sheets [75 g/m
2
]), deck (1 drawer,
capacity 3,000 sheets [75 g/m
2
], plus stack bypass tray (capacity 100 sheets [75 g/m
2
])
Copy paper ....................................Drawer, deck, duplex unit: Standard paper (64-80 g/m
2
)
Stack bypass tray : standard paper (60-160 g/m
2
) or special paper (tracing paper, colored
paper, transparencies, letterheads, etc.), envelop [only when using the printer function]
(COM-10, Monarch, DL an C5)
Continuous copying .....................1-999 sheets
Exposure system ..........................The platen: Slit exposure by means of moving optical system
DF originals: Slit exposure with traveling original
Light source...................................Rare gas lamp
Developing system .......................Dry process
Toner replenishment system .......Automatic replenishment from toner cartridge
Fixing system ................................Heat roller
Cleaning system............................Blade
Photoconductor ............................OPC
Functions and modes...................Self-diagnosis function, energy save mode, auto exposure adjustment function, original size
detection function, auto paper size selection function, auto magnification selection mode, zoom
copy mode, size zoom mode, standard zoom mode, XY zoom mode, photo mode, 2-sided
copy, margin shift mode, print page numbers function, page separation copy mode, border
erase mode, sheet copy, transparency backing sheet function, form overlay, combine copy,
booklet + cover copy, sort copy, invert copy, mirror image mode, program mode, setting change
mode, job build mode, copy management function, week timer mode, language selection
function
Power source.................................AC 120V 60Hz 10.5A
Power consumption......................Rated power consumption MAX. 1300W
Dimensions....................................24
11/16”(W) x 297/16”(D) x 449/16”(H)
627 mm (W)x 748 mm(D) x 1131 mm(H)
Weight ............................................352 lbs. (160 kg) approx
Required space .............................50
5/16” (W) x 297/16”(D)
1278 mm (W) x 748 mm (D)
Optional equipment ......................Finisher, key counter, I/F kit, memory copy board, additional memory (16MB/32MB),
MMD host monitoring system device, copy tray, Booklet stitcher
(Specifications are subject to change without notice)