Filter
Top Products
Saving settings
In a setting menu, an * appears next to the default setting. To change the setting:
1 Press or repeatedly until the setting you want appears.
2 Press :
• To save most settings. An * appears next to the saved setting.
• To select a temporary setting. An * appears next to the selected setting.
Note: The printer reverts to the default setting of a temporary setting after two minutes of inactivity or if the
printer is turned off.
Temporary settings
Copy Mode
– Copies
– Resize
– Lighter/Darker
– Quality
– Repeat Image
– N-Up
– Original Size
– Original Type
Scan Mode
– Quality
– Original Size
– Resize
Photo Card The following Photo Card settings will not time out after two minutes of
inactivity or turning off the power but will return to the factory default settings
when a memory card or flash drive is removed.
– Photo Effects
– Photo Size
– Layout
– Quality
To change the timeout feature:
a Press Settings.
b Press or repeatedly until Device Setup appears.
c Press .
d Press or repeatedly until Clear Settings Timeout appears.
e Press .
f Press or repeatedly until Never appears.
g Press .
3 To change one or more temporary settings into new default settings:
a Press Settings.
b Press or repeatedly until Defaults appears.
25