Filter
Top Products
Working with photos
• Make sure that the printer settings are set correctly for the photos you wish to print. For information on how to
set photo print settings, see “Using the Photo Card menu” on page 21.
• The following print settings will return to the factory default settings when a memory card or flash drive is
removed: Photo Effects, Layout, Paper Size, Paper Type, Photo Size, and Quality.
• For best results, use Lexmark Premium Photo Paper or Lexmark Photo Paper.
• To prevent smudging, avoid touching the surface of a printed photo. For best results, remove each printed sheet
individually from the paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying, or
storing.
Retrieving and managing photos
Inserting a memory card
1 Insert a memory card.
• Insert the card with the brand name label facing to the left.
• If there is an arrow on the card, make sure it points toward the printer.
• Make sure you connect the memory card to the adapter that came with it before inserting it into the slot.
2
1
Slots Memory card
1
• xD Picture Card
• Secure Digital
• Mini Secure Digital (with adapter)
• Micro Secure Digital (with adapter)
• MultiMedia Card
• Reduced Size MultiMedia Card (with adapter)
• Memory Stick
• Memory Stick PRO
• Memory Stick Duo (with adapter) or Memory Stick PRO Duo (with adapter)
2
• Compact Flash Type I and Type II
• Microdrive
• MultiMedia Card mobile (with adapter)
• High Capacity Secure Digital (with adapter)
2 Wait for the light located above the memory card slots on the printer to come on. The light blinks to indicate the
memory card is being read or is transmitting data.
44