Filter
Top Products
j Press .
k If the hour you entered is 12 or less, press or repeatedly until AM, PM, or 24hr appears.
l Press to save the setting.
Related topics:
• “Using the control panel” on page 95
Changing Caller ID pattern using the control panel
The printer supports two distinct Caller ID patterns: Pattern 1 (FSK) and Pattern 2 (DTMF). Depending on the country
or region you live in and the telecommunications company you subscribe to, you may need to switch the pattern for
the printer to display Caller ID information.
1 From the control panel, press Settings.
2 Press or repeatedly until Device Setup appears.
3 Press .
4 Press or repeatedly until Caller ID Pattern appears.
5 Press .
6 Press or repeatedly until the Caller ID pattern setting indicated by an * appears.
Note: The number of patterns is defined by the country or region setting and only the number of patterns defined
for the selected country or region is shown.
7 If you want to change the Caller ID pattern:
a Press or repeatedly until the Caller ID pattern you want appears.
b Press to save the setting.
Managing fax jobs
Forwarding faxes
Use the fax forwarding feature if you are going to be away, but still want to receive your faxes. There are three fax
forwarding settings:
• Off—(Default).
• Forward—The printer sends the fax to the designated fax number.
• Print & Forward—The printer prints the fax and then sends it to the designated fax number.
To set up fax forwarding:
1 From the control panel, press Fax Mode.
2 Press .
3 Press or repeatedly until Fax Setup appears.
4 Press .
5 Press or repeatedly until Ringing and Answering appears.
6 Press .
7 Press or repeatedly until Fax Forward appears.
Faxing using the control panel
29