Filter
Top Products
Load up to Make sure
30 sheets of:
• Custom-size paper
• Prepunched paper
• Reinforced-edge copier paper
• Preprinted forms
• Letterhead paper
• Photo paper
• The document is loaded facedown.
• The paper guides rest against the edges of the paper.
• The paper size fits within these dimensions:
Width:
– 76.2 mm–215.9 mm
– 3.5 in.–8.5 in.
Length:
– 127.0 mm–355.6 mm
– 5.0 in.–14.0 in.
• You allow preprinted media to dry thoroughly before loading
into the ADF.
• You do not use media printed with metallic ink particles.
• You avoid embossed designs.
Related topics:
• “Understanding the parts of the printer” on page 92
• “Scanning a document” on page 71
Learning about the All-In-One Center scan options
Choosing where to send scanned images
1 From the Finder desktop, double-click the Lexmark 5000 Series folder.
2 Double-click the Lexmark 5000 Series Center icon.
3 From the “Send scanned image to” pop-up menu, choose the scan destination.
• File—Saves the scanned image as a file to open later.
• Clipboard—Saves the scanned image to the Clipboard so you can paste it into another document. Large
scans may not fit the Clipboard.
Note: Scanning at a high resolution to the Clipboard uses a large amount of system memory and drastically
affects system performance.
• An application—Opens the scanned image in the specified application.
Related topics:
• “Saving a scanned image” on page 76
• “Using the All-In-One Center” on page 110
Editing the Customize list
The list of applications in the Customize list is generated when you install the All-In-One software. You can expand
this list to a maximum of 50 applications. You can add, remove, or modify an application in the Customize list.
1 From the Finder desktop, double-click the Lexmark 5000 Series folder.
2 Double-click the Lexmark 5000 Series Center icon.
3 From the “Send scanned image to” pop-up menu, scroll down to the bottom of the list, and choose Customize
list. The Customize list dialog appears, showing all available applications.
Scanning
65