Filter
Top Products
DO THE PRINT CARTRIDGES HAVE INK?
1 Click Programs or All Programs Lexmark 5300 Series.
2 Click Solution Center.
If an exclamation point (!) appears on either of the print cartridges, the ink level is low. Install a new cartridge.
For more information, see “Installing print cartridges.”
IS THERE A PROBLEM WITH THE CONNECTIONS?
For more information, see “Cable is not connected, is loose, or is damaged.”
Checking the Spool Settings for banner printing
Banner printing is not possible if certain Spool Settings are selected. Verify that you have the right settings selected.
1 Click Start Settings Printers or Printers and Faxes.
2 Right-click the Lexmark 5300 Series icon.
3 Select Properties.
4 Click the Advanced tab.
5 At the bottom of the Advanced tab, click Print Processor.
6 Verify that the Default data type is LEMF. If it is not, select LEMF from the available choices, and then click OK.
Resolving font problems
H
AVE YOU APPLIED THE FONTS CORRECTLY IN THE PROGRAM?
Most programs do not print a stretched or resized font.
IS THE FONT A TRUETYPE FONT? IS IT AVAILABLE ON THE COMPUTER?
The font you are trying to print may not be available in the program font selection box. Not all fonts are designed
to be printed; make sure the font is a TrueType font. See the program documentation for more information.
WAS THE DOCUMENT FORMATTED OR CREATED FOR THE PRINTER?
Windows may substitute different fonts. Line and page breaks may change with the font. Use the program that
created the document to fix these problems, and then save the changes for the next time you print.
Printer is busy printing another job
Wait until the printer has finished printing all other print jobs before sending this job to print.
Troubleshooting
138