Filter
Top Products
Saving settings
In a setting menu, an * appears next to the default setting. To change the setting:
1 Press or repeatedly until the setting you want appears.
2 Press :
• To save most settings. An * appears next to the saved setting.
• To select a temporary setting. An * appears next to the selected setting.
Note: The printer reverts to the default setting of a temporary setting after two minutes of inactivity or if
the printer is turned off.
Temporary settings
Copy Mode
– Copies
– Resize
– Lighter/Darker
– Quality
– Repeat Image
– N-Up
– Original Size
– Original Type
Scan Mode
– Quality
– Original Size
– Resize
Fax Mode
– Lighter/Darker
– Quality
Photo Card The following Photo Card settings will not time-out after two minutes of
inactivity or turning off the power but will return to the factory default settings
when a memory card or flash drive is removed.
– Photo Effects
– Paper Size
– Photo Size
– Layout
– Quality
– Paper Type
To change the time-out feature:
a Press .
b Press or repeatedly until Tools appears.
c Press .
d Press or repeatedly until Device Setup appears.
e Press .
f Press or repeatedly until Clear Settings Timeout appears.
Setting up the printer
39