Lexmark X746de Printer User Manual


 
Custom Scan Sizes menu
Use To
Custom Scan Size [x]
Scan Size Name
Width
1–11.69 inches (25–297 mm)
Height
1–17 inches (25–432 mm)
Orientation
Portrait
Landscape
2 scans per side
Off
On
Specify a custom scan size name, scan sizes, and options. The custom scan size
name replaces Custom Scan Size [x] in the printer menus.
Notes:
11.69 inches is the US factory default setting for Width. 297 millimeters
is the international factory default setting for Width.
17 inches is the US factory default setting for Height. 432 millimeters is
the international factory default setting for Height.
Portrait is the factory default setting for Orientation.
Off is the factory default setting for “2 scans per side.”
Custom Names menu
Use To
Custom Name [x]
[none]
Specify a custom name for a paper type. This name replaces Custom Type [x] in
the printer menus.
Universal Setup menu
Use To
Units of Measure
Inches
Millimeters
Specify the unit of measure.
Note: Inches is the US factory default setting. Millimeters is the
international factory default setting.
Portrait Width
3–48 inches
76–1219 mm
Set the width for a portrait page orientation.
Notes:
8.5 inches is the US factory default setting. 216 mm is the
international factory default setting.
If the specified width exceeds the maximum, then the printer uses
the maximum width allowed.
The width can be increased in 0.01-inch or in 1-mm increments.
Portrait Height
3–48 inches
76–1219 mm
Set the height for a portrait page orientation.
Notes:
14 inches is the US factory default setting. 356 mm is the
international factory default setting.
If the specified height exceeds the maximum, then the printer uses
the maximum height allowed.
The height can be increased in 0.01-inch or in 1-mm increments.
Understanding the printer menus 144