Filter
Top Products
Use the To
4 Dial pause
button
• Cause a two- or three-second dial pause in a fax number. In the Fax To field, a dial pause is
represented by a comma (,).
• Redial a fax number.
Notes:
• Pressing outside of the Fax menu causes an error beep.
• Pressing from the home screen redials the most recent fax number.
5 Indicator
light
• Off—The printer is off.
• Blinking green—The printer is warming up, processing data, or printing.
• Solid green—The printer is on, but idle.
• Blinking red— Operator intervention is needed.
6 Start button
• Initiate the current job indicated on the display.
• Start a copy job with the default settings.
Note: Pressing the button while scanning has no effect.
7 Stop button Stop all printer activity.
Note: A list of options is displayed once Stopped appears on the display.
8 Home
button
Return to the home screen.
Note: Pressing the Home button from the home screen resets all workflow factory defaults.
9 Back button
• Delete the right-most digit of the value in the Copy Count field. The factory default value of 1
appears if the entire number is deleted by pressing
numerous times.
• Delete the right-most digit of a number entered manually in the Fax Destination List field. You
can also press
to delete an entire shortcut entry. When an entire line is deleted, another
press of
causes the cursor to move up one line.
• Delete the character to the left of the cursor in the E-mail Destination List field. If the character
is in a shortcut, then the shortcut is deleted.
10 USB port Connect a flash drive to the printer.
Note: Only the front USB port supports flash drives.
Learning about the printer 15