Filter
Top Products
Use To
Print Resolution
1200 dpi
4800 CQ
Specify the printed output resolution.
Note: 4800 CQ is the factory default setting.
Toner Darkness
1–5
Lighten or darken the printed output.
Notes:
• 4 is the factory default setting.
• Selecting a smaller number can help conserve toner.
• If Print Mode is set to Black Only, then a setting of 5 increases toner density and
darkness to all print jobs.
• If Print Mode is set to Color, then a setting of 5 is the same as a setting of 4.
Enhance Fine Lines
On
Off
Enable a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts.
Notes:
• Off is the factory default setting.
• To set Enhance Fine Lines from the software program, with a document open,
click File > Print, and then click Properties, Preferences, Options, or Setup.,
• To set Enhance Fine Lines using the Embedded Web Server, open a Web browser,
and then type the IP address of the printer in the address field.
Color Saver
On
Off
Reduce the amount of toner used for graphics and images. The amount of toner used
for text is not reduced.
Notes:
• Off is the factory default setting.
• On overrides Toner Darkness settings.
RGB Brightness
‑6 to 6
Adjust brightness in color outputs.
Notes:
• 0 is the factory default setting.
• This does not affect files where CMYK color specifications are being used.
RGB Contrast
0–5
Adjust contrast in color outputs.
Notes:
• 0 is the factory default setting.
• This does not affect files where CMYK color specifications are being used.
RGB Saturation
0–5
Adjust saturation in color outputs.
Notes:
• 0 is the factory default setting.
• This does not affect files where CMYK color specifications are being used.
Understanding the printer menus 206