Filter
Top Products
General Fax Settings
Use To
Fax Name or Station Name Specify the name of the fax in the printer.
Fax Number or Station Number Specify the number assigned to the fax.
Station ID
Fax Name or Station Name
Fax Number or Station Number
Specify how the fax is identified.
Enable Manual Fax
Off
On
Set the printer to fax manually only, which requires a line splitter and a telephone
handset.
Notes:
• Use a regular telephone to answer an incoming fax job and to dial a fax
number.
• Touch # 0 on the numeric keypad to go directly to the Manual Fax function.
Memory Use
Equal
Mostly sent
All send
All receive
Mostly receive
Define the allocation of non-volatile memory between sending and receiving fax jobs.
Notes:
• “Equal” is the factory default setting. Equal splits the memory for sending and
receiving fax jobs into equal amounts.
• “Mostly sent” specifies that most of the memory is set to send fax jobs.
• “All send” specifies that all the memory is set to send fax jobs.
• “All receive” specifies that all the memory is set to receive fax jobs.
• “Mostly receive” specifies that most of the memory is set to receive fax jobs.
Cancel Faxes
Allow
Don't Allow
Specify whether or not the printer cancels fax jobs.
Caller ID
On
Off
Alternate
Specify the type of caller ID being used.
Fax number masking
Off
From left
From right
Specify the direction from where digits are masked in an outgoing fax number.
Note: The number of characters masked is determined by the “Digits to mask”
setting.
Digits to mask
0–58
Specify the number of digits to mask in an outgoing fax number.
Understanding the printer menus 179