Filter
Top Products
Load Manual Feeder with [paper type] [paper size]
Try one or more of the following:
• Load the feeder with the correct paper size and type.
• From the printer control panel, touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear
the message and continue printing.
• Touch Automatically select paper to use the paper loaded in the tray.
• Cancel the print job.
Memory full, cannot print faxes
There is not enough memory to print the fax job.
Touch Continue to clear the message without printing. Held faxes will attempt to print after the printer has been
restarted.
No analog phone line connected to modem, fax is disabled.
Make sure the analog phone line is plugged into the modem.
Paper changes needed
Try one or more of the following:
• Touch Use current supplies to clear the message and continue printing.
• Cancel the current print job.
Remove packaging material, [area name]
Remove any remaining packaging material from the specified location.
Remove paper from standard output bin
Remove the stack of paper from the standard exit bin.
Replace separator pad
Install a new separator pad.
Restore held jobs?
Try one or more of the following:
• Touch Restore to restore all held jobs stored on the printer hard disk.
• Touch Do not restore if you do not want any print jobs to be restored.
Troubleshooting 275