Lexmark X746de Printer User Manual


 
Fax Receive Settings
Use To
Enable Fax Receive
On
Off
Allow the printer to receive fax jobs.
Note: On is the factory default setting.
Fax Job Waiting
None
Toner
Toner and Supplies
Remove fax jobs that request specific unavailable resources from the print queue.
Note: None is the factory default setting.
Rings to Answer
1–25
Specify the number of rings before answering an incoming fax job.
Note: 3 is the factory default setting.
Auto Reduction
On
Off
Scale an incoming fax job so that it fits the size of the paper loaded in the designated
fax source.
Note: On is the factory default setting.
Paper Source
Auto
Tray [x]
MultiPurpose Feeder
Specify the paper source selected to supply paper for the printer to print an incoming
fax.
Sides (Duplex)
Off
On
Enable twosided (duplex) printing for incoming fax jobs.
Separator Sheets
Off
Before Job
After Job
Enable the printer to include separator sheets for incoming fax jobs.
Separator Sheet Source
Tray [x]
Manual Feeder
Specify where the printer will pick the separator sheet.
Output Bin
Standard Bin
Bin [x]
Specify an exit bin for received faxes.
Note: Bin 1 is available only when a finisher is installed.
Fax Footer
Off
On
Print the transmission information at the bottom of each page from a received fax.
Note: Off is the factory default setting.
Max Speed
2400
4800
9600
14400
33600
Specify the maximum speed in baud at which faxes are received.
Understanding the printer menus 184