Filter
Top Products
Reports menu
To access the menu, navigate to any of the following:
• Network/Ports menu > Networks/Ports > Standard Network > Standard Network Setup > Reports
• Network/Ports menu > Networks/Ports > Network [x] > Network [x] Setup > Reports
Use To
Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address.
Network Card menu
To access the menu, navigate to any of the following:
• Network/Ports menu > Network/Ports > Standard Network > Standard Network Setup > Network Card
• Network/Ports menu > Network/Ports > Network [x] > Network [x] Setup > Network Card
Use To
View Card Status
Connected
Disconnected
View the connection status of the network card.
View Card Speed View the speed of an active network card.
Network Address
UAA
LAA
View the network addresses.
Job Timeout
0, 10–255 seconds
Set the amount of time it takes for a network print job to be canceled.
Notes:
• 90 seconds is the factory default setting.
• A setting value of 0 disables the timeout.
• If a value of 1–9 is selected, then the setting is saved as 10.
Banner Page
Off
On
Allow the printer to print a banner page.
Note: Off is the factory default setting.
TCP/IP menu
Note: This menu is available only in network models or printers attached to print servers.
To access the menu, navigate to any of the following:
• Network/Ports > Standard Network > Standard Network Setup >TCP/IP
• Network/Ports > Network [x] > Network [x] Setup >TCP/IP
Use To
Activate
On
Off
Activate or deactivate TCP/IP.
Note: On is the factory default setting.
Understanding the printer menus 148