Filter
Top Products
NOTE: Bar codes printed in parallel mode (top of the bar
code toward top of tag) on the 9465 only have the
characters per inch shown in the following table.
Quiet Zone
When you estimate the area you’ll need for the bar code,
remember to add the length of the quiet zone. The quiet zone
is an area of white space required at the beginning and end of
each bar code. The minimum size of the quiet zone is 0.10, or
10 times the width of the narrowest bar code element,
whichever is greater. The tables below show the minimum
size of the quiet zone at each density. For wand scanning, the
quiet zone should be 0.25 to 0.35 inch.
Density Numeric Data Alphanumeric data
1 23.92 11.96
2 15.95 7.97
3 11.96 5.98
Density Numeric Data Alphanumeric data
1 17.48 8.74
2 11.66 5.83
3 8.74 4.37
Density Quiet Zone
1 0.10 inch
2 0.15 inch
3 0.20 inch
9400 Series User’s Manual
A-4