Filter
Top Products
Defining the Supply for a Format
You’ll also need to decide the following items.
Number of parts The number of times the data prints across
the tag width. The supply may or may not
be perforated. For example, if you want the
data to print only once on the tag, then
enter 1 for
one part
supply. The section
"Creating a Multiple Part Tag" tells you how
to create multiple part tags.
Values: 1-5
Cutting Whether you want cuts between each tag
or set of tags. You can answer "yes" to this
prompt only if your printer has a knife. A
"no" answer prints all the tags in one strip.
Values: Y (yes) or N (no)
Cut last ticket Do you want to cut the last tag or label in a
batch as soon as you print it? (Normally,
the last tag of label remains in the printer
until the next batch begins to print). You
only see this prompt if you answer "yes" to
the
Cutting
prompt.
NOTE: If you choose, Y the printing shifts
0.78 inch toward the top of the supply (the
edge of the supply that exits the printer
last). Choose N if your format has fields on
the first 0.78 inch.
Values: 1-9999
Cut multiple The number of tags or labels printed
between cuts as a set. For example, if you
want two copies of each tag, choose a cut
multiple of 2. This prompt only appears if
you answered "yes" to the
Cutting
prompt.
Values: 1-9999
9400 Series User’s Manual
2-16