Filter
Top Products
Setting ECM
Default setting: ON.
“Line noise,” or static on the line during a call, can easily disrupt the flow of data
from one fax machine to another.
That’s why your fax machine gives you the option of using Error Correction Mode
(
ECM
). When two fax machines communicate while running in
ECM
, the sending
machine automatically checks the data as it sends. If the receiving fax machine can’t
verify the transmission, the first machine will re-send it as necessary.
Note:
ECM
gives you a better chance of transmitting a fax document over a bad
phone line, but it could also slow down the transmission time. The worse a
line is, the slower the transmission. That’s why the machine lets you turn
ECM
on or off as needed.
Note: Not all fax machines have
ECM
. If you’ve activated
ECM
and then transmit to
a fax machine not currently using
ECM
, there will be no change in the fax
transmission from a usual, non-
ECM
transmission.
1
Press
MENU
,2,2,0,9,
ENTER
. The
LCD
shows the current
ECM
setting:
2
Using the cursor key, select the mode you want.
Then press
ENTER
to save the setting.
Memory transmission
Default setting: ON.
Note: When the machine’s memory is full, it can transmit only through the docu-
ment feeder (real time transmission).
To change the default setting of memory transmission:
1
Press
MENU
,2,2,0,6,
ENTER
. The
LCD
shows:
2
Using the cursor key, select the mode you want.
Then press
ENTER
to save the setting.
If the
MEMORY TRANSMIT
light glows, memory transmission is on.
If the
MEMORY TRANSMIT
light doesn’t glow, memory transmission is off.
Quick Memory transmission
Default setting: ON.
Important: Your fax machine’s memory transmission feature must be turned on
to use Quick Memory transmission (see left column).
To change the default setting of Quick Memory transmission:
1
Press
MENU
,2,2,0,7,
ENTER
. The
LCD
shows:
2
Using the cursor key, select the mode you want.
Then press
ENTER
to save the setting.
TTI transmission
Default setting: ON.
Every fax page you send arrives at the receiving machine with a single line of text
at the very top of the page. This text lists a name, called the Transmit Terminal
Identifier (
TTI
), and a fax number. You can set the machine to not send the
TTI
.
1
Press
MENU
,2,2,0,8,
ENTER
. The
LCD
shows:
2
Using the cursor key, select the mode you want.
Then press
ENTER
to save the setting.
Changing the default settings
4.2