Filter
Top Products
2.5
Basic operation
Redialing
Automatically fax redialing
If your fax call fails, your machine automatically redials it. In this Auto Redial
mode, your fax automatically redials the number up to two times at one minute inter-
vals.
Note: You can change the redial time and interval settings. (See “Changing redial
settings,” page 4.5.)
While in the Auto Redial mode, “AutoRedial” appears on the upper right of the
LCD
,
and the machine can continue to receive faxes and can make as many as 99 fax
transmissions.
Note: If you used either the
MONITOR
/
CALL
key or a handset to dial the call, you
must redial manually (see below).
Note: If the last redial attempt fails, your machine may print (and/or display)
error messages.
Redialing manually
You can always redial calls manually. And you must redial manually if you used
either the
MONITOR
/
CALL
key or an optional handset to dial the failed call.
To redial a fax call manually without using the
MONITOR
/
CALL
key or an
optional handset:
1
Set the document and set the resolution and contrast.
2
Press (
REDIAL
). The
LCD
will show:
3
Your machine can remember the last 10 dial numbers. Press or until the
dial number you want to redial appears.
4
Press
START
.
To redial a fax call manually with the
MONITOR
/
CALL
key or an optional
handset:
1
Make sure the document is in the ADF and that the resolution and contrast
are set.
2
Press
MONITOR
/
CALL
or lift the optional handset to get a dial tone.
3
Press (
REDIAL
). The
LCD
will show:
4
Your machine can remember the last 10 dial numbers. Press or until the
dial number you want to redial appears.
5
When you hear fax tones from the remote unit, press
START
.
Note: If a person answers the phone, use the optional handset to tell that
person you’re sending a fax. When you hear fax tones, press
START
.
To redial a voice call manually using the optional handset:
1
Lift the optional handset to get a dial tone.
2
Press (
REDIAL
). The
LCD
will show:
3
Your machine can memory the latest 10 dial numbers. Press or until the
dial number you want to redial appears.
4
Press
START
.
When the other person answers, use the optional handset to speak to that
person.