Filter
Top Products
Advanced features
F-Code polling
1
Press
FAX
to switch the machine to Fax mode.
2
Press
COMM
.
OPTIONS
. The
LCD
shows:
3
Select “F-Code Polling” and press
ENTER
. The
LCD
shows:
4
Use the numeric keypad to enter the appropriate sub-address.
Note: If you make a mistake, press
CANCEL
to erase the character, then
enter the correct number.
5
Press
ENTER
. The
LCD
shows:
Note: If this sub-address does not have a password, skip to step 7.
6
Use the numeric keypad to enter the password.
7
Press
ENTER
. The
LCD
shows:
8
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press
START
.
9
What you do now depends on when you want the polling to begin.
• To have it begin now, skip to step 12.
• To delay it, go on to step 10.
10
Press
COMM
.
OPTIONS
,
ENTER
. The
LCD
shows:
11
Use the numeric keypad to enter the day and time when the polling should
begin, then press
ENTER
.
12
Press
START
.
If in step 9 you chose an immediate polling, your fax machine begins dialing. If you
chose a delayed command, the machine shows “Reserved” on the
LCD
, indicating that
it has stored the command in memory and will complete it later.
3.37