Filter
Top Products
Changing the default settings
Setting Sleep mode (Energy saving mode)
Default setting: On
Note: All
LED
lamps on the control panel will not be off, even when the machine is
in the sleep mode.
If you want to change the Sleep mode to OFF, you can set it here.
1
Press
MENU
,2,1,0,5,
ENTER
. The
LCD
shows:
2
Using the cursor key, select the mode you want.
Then press
ENTER
to save the setting.
Setting paper source
Default setting: 1st cassette: Fax/Copy, Bypass Tray: Fax/Copy
1
Press
MENU
, 2, 1, 0, 8,
ENTER
. The
LCD
shows:
2
Select the item you want to change the setting using the cursor key and then
press
ENTER
. The
LCD
will show:
3
Select “Fax/Copy”, “Fax” or “Copy” as you want. Then press
ENTER
.
“Fax/Copy”: Select this if you want to use the paper source you selected for
faxing, list (or report) printing and copying.
“Fax”: Select this if you want to use the paper source you selected for
faxing and list (or report) printing.
“Copy”: Select this if you want to use the paper source you selected for
copying only.
“Not Used”: Select this if you do not want to use the paper source you
selected.
If you want to change another setting, repeat steps 2 and 3.
If you do not want to change any more settings, proceed to step 4.
4
Select “Exit” then press
ENTER
to save the setting.
Adjusting the machine’s clock
You can adjust the machine’s clock here.
1
Press
MENU
, 2, 1, 0, 7,
ENTER
. The
LCD
shows:
2
Use the numeric key to enter the current date and time to adjust the clock.
Then press
ENTER
.
Setting 2-bin tray (Option)
Default setting: Copy exit: Lower tray, Fax exit: Upper tray, List exit: Upper tray
You will set where the printed paper emerges in this operation.
Note: This operation will appear only if the optional 2-bin tray has been attached
to your machine.
1
Press
MENU
, 2, 1, 1, 0,
ENTER
. The
LCD
shows:
2
Select the item you want to change the setting by using the cursor key and
then press
ENTER
.
3
Select “Upper” or “Lower” as you want. Then press
ENTER
.
If you want to change another setting, repeat steps 2 and 3.
If you do not want to change any more settings, proceed to step 4.
4
Select “Exit” then press
ENTER
to save the setting.
4.9