Filter
Top Products
34
Select “Erase Tx Doc” and press
ENTER
.The
LCD
shows:
Erasure of transmitted documents tells your machine if it should erase a docu-
ment from the box after a caller retrieves (polls) the document.
ON: Your machine erases the document from the box as soon as it sends it. If
you choose “On”, this box can be polled only once per document.
OFF: Your machine does not erase a document from the box when it’s polled.
As long as your machine holds
AC
power and you do not erase the docu-
ment from the box, the document is available indefinitely for polling.
35
Using the cursor key, select the mode you want.
Press
ENTER
and skip to step 46.
If you chose Relay:
36
The
LCD
shows:
37
Enter the box name, the sub-address and the password for the F-Code box as
described in steps 8-17.
38
Press
ENTER
. The
LCD
shows:
39
Select “Location” and press
ENTER
. The
LCD
shows:
Enter the fax number using a one-touch key, a speed-dial number or a call
group number. You cannot use the numeric keypad to enter these numbers.
You can specify up to 300 numbers for a remote unit.
Note: If you want to review the numbers you entered, press [Review].
If you want to erase any number, move the cursor on it and press
[Erase].
When you finish to review, press [Return] to return to the previous
display.
40
Press
ENTER
. The
LCD
shows:
41
Select “TTI Type” and press
ENTER
. The
LCD
shows:
The machine asks for the type of
TTI
you want to appear on the faxes that are
relayed to other callers.
• Sender — Relay the document with sender unit’s
TTI
(don’t send your
TTI
).
• Both — Relay the document with both the sender unit’s
TTI
and your
TTI
.
• Yours — Relay the document with your
TTI
instead of the sender unit’s.
42
Using the cursor key, select the mode you want.
43
Press
ENTER
. The
LCD
shows:
Advanced features
3.31