Filter
Top Products
1.19
Getting started
4
The
LCD
now shows the current calendar/clock setting, with a cursor appear-
ing on the first digit.
5
Use the numeric keypad to enter the correct date and time, using a
MMDDYY
format for the date and 24-hour format for the time. For instance, to set 2:30
PM
on September 27, 2001, press 0 9 2 7 0 1 1 4 3 0, which results in:
Note: Your fax machine automatically inserts the spaces and date-slash. All
you have to do is enter the digits.
To change a digit, press to move the cursor left, or to move it right.
Then enter the correct digit.
6
Press
ENTER
to save the clock setting and continue.
7
The
LCD
now asks if you want to set the calendar/clock to automatically
recognize daylight saving time (
DST
).
When the setting is ON, your machine automatically recognizes
DST
at 2
AM
on
the appropriate switchover Sundays each year.
When the setting is OFF, no automatic change will occur.
8
Using the cursor key, select the mode you want.
9
Press
ENTER
to save the setting and continue.
10
The
LCD
now shows the machine’s current reception mode.
11
For now, select Fax Ready. (This setting can always be changed. We’ll discuss
reception modes further on pages 2.8–2.9.)
12
Press
ENTER
to save the setting and continue.
13
The
LCD
now asks you to enter the type of dialing needed for the fax machine,
either tone or pulse:
14
Using the cursor key, select the mode you want.
15
Press
ENTER
to save the setting and continue.
16
The
LCD
now asks you to enter your fax number as you want it to appear on
other fax machines’ displays or printouts. The fax industry term for this
number is Subscriber
ID
.
17
Use the numeric keypad to enter the fax number. The number may contain up
to 20 characters (numbers and dashes).
Note: To insert a dash, as shown here, press [ – ]. To insert “ + ” before the
country number for the overseas call, press [ + ].
Note: If you make a mistake, press
CANCEL
to erase to the left.
To change just one number, press to move left, or to move right.
Press
CANCEL
to erase the number. Then re-enter the fax number cor-
rectly.
18
Press
ENTER
to save the number and continue.
19
The
LCD
now asks you to enter the name you want to appear at the top of
faxes you send. You can enter three of TTI.
Select TTI 1, 2 or 3 using the cursor key.