Filter
Top Products
Advanced features
5
The
LCD
shows:
6
If you want to modify an existing entry in the blocked numbers list, select the
number you want to modify using the cursor key.
… or …
If you want to enter a new number in an already-started blocked numbers
list, select an empty position in the list.
Then press
ENTER
to enter or modify the blocked number.
Note: To clear a number from the list, see “Clearing a number from the
blocked numbers list,” next column.
7
Use the numeric keypad to enter the last eight characters of a fax number you
want to block. For example, if you want to block a fax from someone with a
Subscriber
ID
of 972-555-3038, you should enter 5, 5, 5,
PAUSE
/
DIAL OPT
., 3, 0,
3, 8:
To change a specific digit, press to move left or to move right until the
cursor is under the digit, then use the numeric keypad to enter the correct
number.
8
Press
ENTER
to save the setting. The
LCD
shows the next “slot” in the blocked
numbers list.
If you do not want to enter or change a number for this slot, go on to step 9.
If you do want to enter or change a number for this slot, repeat steps 6–8.
9
Press
STOP
to return your machine to standby mode.
Clearing a number from the blocked numbers list
To clear a number from the list:
1
Press
MENU
,2,2,1,0,
ENTER
. The
LCD
shows:
2
Select “Block Junk Fax Mode” and press
ENTER
. The
LCD
shows:
3
Select Mode 2 or Mode 3. The
LCD
shows:
4
Using the cursor key, select the number you want to clear.
5
Press [Erase] to clear the number. The
LCD
shows:
Important: If you want to quit without erasing the number you’ve selected,
press [No]. The fax will return to step 4.
6
Press [Yes] to clear the number.
To clear another number from the blocked numbers list, repeat steps 4–6.
Otherwise, go on to step 7.
7
Press
STOP
to return your machine to standby mode.
Printing a list of the blocked numbers
Forgot which number is stored in the blocked number list? Just print a list of the
blocked numbers.
To print a list of the blocked numbers, press
MENU
,5,1,0,8,
ENTER
.
3.51