Filter
Top Products
Advanced features
5
Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever codes your phone system requires. The number can
be up to 40 characters in length:
Your display can show only 30 characters at a time. To view characters beyond
those 30, press to scroll to the left or to scroll to the right.
6
Press
ENTER
. The
LCD
now asks which operation you want to program into the
programmable one-touch:
7
Select “Delayed Transmit” and press
ENTER
. The
LCD
shows:
8
Tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, “Do this at 5:05
PM
on the 30th.”)
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Option 2: Perform the command at a certain time each day you press the
key. (For example, “Do this at 5:05
PM
today.”)
To select this option, use the numeric keypad to enter 0, 0 and
then the time the fax should perform the command:
9
Press
ENTER
.
10
Select “Exit” and press
ENTER
. The
LCD
shows:
The
LCD
asks if you want to make option settings which includes; resolution,
contrast, memory transmission, report, cover page and Fax & Copy. If you
want to make any of these settings, select ON using the cursor key.
11
Press
ENTER
.
If you select ON, proceed to step 12.
If you select OFF, skip to step 16.
12
The
LCD
shows:
13
Using the cursor key, select the setting you want to specify for this program-
mable one-touch number. Then press
ENTER
.
14
Using the cursor key, select the mode you want. Then press
ENTER
.
If you want to make another setting, repeat step 13 and 14.
Note: Choose “-----” if you do not want to specify for this programmable one-
touch key.
15
Select “Exit” and press
ENTER
.
16
Press
STOP
to return your machine to standby mode.
3.39