Filter
Top Products
2.11
Basic operation
3
If necessary, select desired resolution, contrast, reduction ratio.
4
Press
START
to begin the copying process.
Memory overflow message
If you’ve stored too much information in your machine’s memory, a “Memory
Overflow” message may appear on the
LCD
.
If the memory overflow occurred at the first page:
Press
STOP
to discharge the documents from the
ADF
.
If the memory overflow occurred at the second page or later:
If this message appears, press [Yes] to tell your machine to print out the document
stored in memory, or press [No] to erase all pages stored during the current opera-
tion (but not previous operations).
Note: If you don’t operate your machine within 60 seconds, the machine will auto-
matically print out the document stored in the memory during the current
operation.
If the paper runs out while copying
When your machine runs out of paper, it beeps, the
ALARM
light glows and the
LCD
shows which source has run out of paper – the 1st cassette, 2nd cassette (optional)
or the bypass tray.
In this example, the machine runs out of the paper in the 1st cassette:
If you want to cancel the current copying job, press
STOP
. Otherwise, supply the
paper to displayed paper source to resume the copying.