Filter
Top Products
1.20
Getting started
20
Press
ENTER
. The
LCD
will show:
21
Use the numeric keypad to enter characters. The name may be up to 22 char-
acters in length. Regarding entering characters, see page 1.12.
Note: If you make a mistake, press
CANCEL
to erase to the left.
To change just one character in the name, move the cursor by cursor
key. Press
CANCEL
to erase the character. Then re-enter the character
correctly.
22
Press
ENTER
to save the TTI.
If you do want to set or change another TTI, go back to step 19.
If you do not want to set or change another TTI, proceed to step 23.
23
Select “Exit” and then press
ENTER
and continue.
24
The
LCD
now asks you to set the usual TTI.
Select the TTI you want to appear usually at the top of faxes you send using
the cursor key.
25
Press
ENTER
to save the setting and continue.
26
The
LCD
now asks you to enter the time for the sleep mode. Your machine will
now automatically enter sleep mode after your selected idle time has elapsed.
27
Enter the time (in minutes) using the numeric keypad.
28
Press
ENTER
to save the setting. Your machine will return to standby mode.